HSG BLOG

Gently warm the stone, this is to help loosen the concentrate buildup that may have occurred during usage. After that, firmly and as flat as possible, turn the pipe or slide over and tap on a soft surface. 1-2 firm but soft taps, should remove the stone from the pipe or slide.

Easily determine the correct joint size using a penny. There are 3 sizes in general. 10mm, 14mm and 18mm. Below image is a simple guide to help determine your correct joint size using a penny.

Butane combustion yields CO2 and H2O as by-products, which is naturally around you at any given moment. Opening a can of soda will also produce similar by-products. As long as there is a flame, butane is burning away. Butane in lighters is burnt off as the flame ignites. This is especially true with torch lighters, which tend to burn off all butane much better. Please do your own research and educate yourself. HealthstoneGlass.com does not make any claims of health benefits. The above statements are based on 3rd party research taken from various trusted sources.

Healthstone works by using only the heat from the torch. Easily vaporize your concentrates on the go. Keep the end of the torch flame approx. 1-2 inches away from the stone. The heat will transfer over and initially melts your concentrate into the stone as you inhale and taste the terpenes, as the stone continues to heat up further, you will get increased vapor, and be in for an enjoyable sesh. 

The Healthstone can be easily cleaned in a couple of ways. Before all else, you must remove the stone from a pipe or attachment by (gently but firmly) striking the stone face down on the palm of your hand, or any soft surface. The first way (and the most recommended method) is to soak the stone in warm Dark Crystal Cleaner™ or isopropyl alcohol for 1-2 hours. To dry you lightly pat it on a dry paper towel and let sit in a well ventilated area for at least 30 minutes. The second way (less suggested method) is by holding...